Ceramic fiber blanket with no furnace lining water wall resistance furnace with melting, even with the process of fiber forming, double-sided needling; fiber length, thick and uniform, high tensile strength, anti-air erosion ability, good thermal stability. Through the fully controlled blanket heating furnace heat treatment, ceramic products can be pre-phase change, reduce the use of products in the process of high temperature shrinkage; at the same time the use of high-quality raw materials and special purification and mixing production process, effectively reducing the product In the impurity content, improve the product's thermal stability.


The main performance characteristics of ceramic fiber blanket are summarized as follows:
         Small bulk density
         Heat capacity (heat storage) is low
         Thermal conductivity is small
         Thermal shock and mechanical shock performance
         Sound insulation is good
         Construction, easy maintenance

Advantages can be divided into five categories:
1.  Excellent environmental performance. The use of waste silk fiber production, the fiber diameter of 5 microns, fiber length 200 mm, tensile strength, construction, maintenance process is not easy to produce dust, and the resulting dust will not cause occupational hazards, does not affect human health.
2.  Excellent tensile strength. The product uses double-sided acupuncture, the bulk density of 128kg / m3 tensile strength of 40000Pa.
3.  Excellent insulation performance. The classification temperature of the product is 1260 ℃, the safe use temperature is below 1000 ℃, the thermal conductivity is small, the average thermal conductivity of 400 ℃ under the conditions of only 0.085, effectively improve the product insulation performance.
4.  Excellent chemical stability, thermal stability, thermal shock resistance and sound absorption, construction, maintenance is simple.